[IRCServices] chan is not working correctly

[Angel of Death]

Elite has released 3.0 and it's no longer costing money. Unreal is a rip of 
an old version of Elite2.1.  The coder to Elite works/runs a server on my 
network. IF there's any questions or comments about the EliteIRCD they are 
welcome to swing by and drop them off. irc.acestar.org  We are working on 
weeding out the services U line flaw. It's more of an annoyance than 
anything cause it doesn't actually stop anything from working.

Muerte


>From: "Chris" <chriswh at cyberhighway.net>
>Reply-To: ircservices at ender.shadowfire.org
>To: <ircservices at ender.shadowfire.org>
>Subject: Re: [IRCServices] chan is not working correctly
>Date: Fri, 24 Dec 1999 18:50:47 -0500
>
>I had this problem. It was also with EliteIRCD. Elite removed some kind of
>services aliasing or something somewhere along the line, as it said
>somewhere thast I don't remember. (Elite costs money now anyway so go with
>Unreal. I don't know the Unreal site but after the discussion I was
>involved in earlier about this on this list, I'm sure many people still
>have that address. Go Unreal!)
>Anyway, I'm not sure as to the exact cause, but I know it is VERY VERY
>_ANNOYING_. I noticed that with some IRCDs, the config file requires that
>U:Lines be in certain positions. Nowhere does it state this, but it's the
>only way I have found it to work. Different ways with the different IRCDs.
>I would try Josh's U:Line of
>U:services.*.*:*:*
>If that doesn't help, and it should fix the problem, I don't know who else
>to ask.
>
>Just my thoughts, though pretty much restating what was already said
>-Chris
>
>----------
> > From: Josh Odom <joshodom at uswest.net>
> > To: ircservices at ender.shadowfire.org
> > Subject: Re: [IRCServices] chan is not working correctly
> > Date: Friday, December 24, 1999 2:48 AM
> >
> > I had the same type of problem with EliteIRCD. The type of U:line the 
>FAQ
> > described to use didn't work either. The only U:Line that I found to 
>work
> > was
> > U:services.*.*:*:*
> > I'm not sure why even
> > U:services.network.com:*:*
> > didn't work...... Anyone else experience the same problem?
> >
> > Josh Odom
> > PhazerIRC Network
> >
> > ----- Original Message -----
> > From: "Makero" <makero at 13g.dhs.org>
> > To: "Makero" <makero at 13g.dhs.org>; <ircservices at gp.school.za>
> > Sent: Friday, December 24, 1999 8:50 AM
> > Subject: [IRCServices] chan is not working correctly
> >
> >
> > > Hy
> > >
> > > This is mi first eMail to this list. I hope to get some help because I
> > > have been working for 3 days around this problem, and I can't find any
> > > answer.
> > >
> > > I'm running IRCDu2.9.x and de latest version of Services (yesterday
> > > downloaded from ircservices official web page, but i find the same
> > > problem with older versions)in a Linux RedHat 6.0.
> > >
> > > When I start services, every thing appears to be OK, but Chan says:
> > > "cant change the modes of the channel because you have a problem with
> > > your U:line."
> > >
> > > y made some changes in my U:line and then Chan go into the channel an
> > > becomes to say: "This channel is registered with chan", "This channel
> > > is registered with chan", "This channel is registered with chan",
> > > "This channel is registered with chan" hundreds and hundreds of times,
> > > until the IRC client crash.
> > >
> > > I try this U:Lines:
> > >
> > > U:my_ip:pass:my_host
> > > U:my_ip:pass:my_ip
> > > U:my_host:pass:my_host
> > > U:my_host:pass:my_services_name
> > >
> > > and some others.
> > >
> > > I think than my problem is that I can't find the correct syntax of the
> > > U:Line. There is no so much info abut the U:Line in the ircd.conf.
> > >
> > > Any idea??
> > >
> > > Thankx
> > >
> > > makero at 13g.dhs.org
> > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------
> > > To unsubscribe, send email to majordomo at ender.shadowfire.org
> > > with "unsubscribe ircservices" in the body, without the quotes.
> > >
> >
> > ---------------------------------------------------------------
> > To unsubscribe, send email to majordomo at ender.shadowfire.org
> > with "unsubscribe ircservices" in the body, without the quotes.
>---------------------------------------------------------------
>To unsubscribe, send email to majordomo at ender.shadowfire.org
>with "unsubscribe ircservices" in the body, without the quotes.

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

---------------------------------------------------------------
To unsubscribe, send email to majordomo at ender.shadowfire.org
with "unsubscribe ircservices" in the body, without the quotes.