[IRCServices] chan is not working correctly

Josh Odom joshodom at uswest.net
Fri Dec 24 08:55:47 PST 1999


Elite is Freeware now, but Unreal is still much better. The UnrealIRCD
website is:
http://toybox.flirt.org/~cmunk/unreal/
Happy Holidays Everyone.

Josh Odom
PhazerIRC Network
----- Original Message -----
From: "Chris" <chriswh at cyberhighway.net>
To: <ircservices at ender.shadowfire.org>
Sent: Friday, December 24, 1999 3:50 PM
Subject: Re: [IRCServices] chan is not working correctly


> I had this problem. It was also with EliteIRCD. Elite removed some kind of
> services aliasing or something somewhere along the line, as it said
> somewhere thast I don't remember. (Elite costs money now anyway so go with
> Unreal. I don't know the Unreal site but after the discussion I was
> involved in earlier about this on this list, I'm sure many people still
> have that address. Go Unreal!)
> Anyway, I'm not sure as to the exact cause, but I know it is VERY VERY
> _ANNOYING_. I noticed that with some IRCDs, the config file requires that
> U:Lines be in certain positions. Nowhere does it state this, but it's the
> only way I have found it to work. Different ways with the different IRCDs.
> I would try Josh's U:Line of
> U:services.*.*:*:*
> If that doesn't help, and it should fix the problem, I don't know who else
> to ask.
>
> Just my thoughts, though pretty much restating what was already said
> -Chris
>
> ----------
> > From: Josh Odom <joshodom at uswest.net>
> > To: ircservices at ender.shadowfire.org
> > Subject: Re: [IRCServices] chan is not working correctly
> > Date: Friday, December 24, 1999 2:48 AM
> >
> > I had the same type of problem with EliteIRCD. The type of U:line the
FAQ
> > described to use didn't work either. The only U:Line that I found to
work
> > was
> > U:services.*.*:*:*
> > I'm not sure why even
> > U:services.network.com:*:*
> > didn't work...... Anyone else experience the same problem?
> >
> > Josh Odom
> > PhazerIRC Network
> >
> > ----- Original Message -----
> > From: "Makero" <makero at 13g.dhs.org>
> > To: "Makero" <makero at 13g.dhs.org>; <ircservices at gp.school.za>
> > Sent: Friday, December 24, 1999 8:50 AM
> > Subject: [IRCServices] chan is not working correctly
> >
> >
> > > Hy
> > >
> > > This is mi first eMail to this list. I hope to get some help because I
> > > have been working for 3 days around this problem, and I can't find any
> > > answer.
> > >
> > > I'm running IRCDu2.9.x and de latest version of Services (yesterday
> > > downloaded from ircservices official web page, but i find the same
> > > problem with older versions)in a Linux RedHat 6.0.
> > >
> > > When I start services, every thing appears to be OK, but Chan says:
> > > "cant change the modes of the channel because you have a problem with
> > > your U:line."
> > >
> > > y made some changes in my U:line and then Chan go into the channel an
> > > becomes to say: "This channel is registered with chan", "This channel
> > > is registered with chan", "This channel is registered with chan",
> > > "This channel is registered with chan" hundreds and hundreds of times,
> > > until the IRC client crash.
> > >
> > > I try this U:Lines:
> > >
> > > U:my_ip:pass:my_host
> > > U:my_ip:pass:my_ip
> > > U:my_host:pass:my_host
> > > U:my_host:pass:my_services_name
> > >
> > > and some others.
> > >
> > > I think than my problem is that I can't find the correct syntax of the
> > > U:Line. There is no so much info abut the U:Line in the ircd.conf.
> > >
> > > Any idea??
> > >
> > > Thankx
> > >
> > > makero at 13g.dhs.org
> > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------
> > > To unsubscribe, send email to majordomo at ender.shadowfire.org
> > > with "unsubscribe ircservices" in the body, without the quotes.
> > >
> >
> > ---------------------------------------------------------------
> > To unsubscribe, send email to majordomo at ender.shadowfire.org
> > with "unsubscribe ircservices" in the body, without the quotes.
> ---------------------------------------------------------------
> To unsubscribe, send email to majordomo at ender.shadowfire.org
> with "unsubscribe ircservices" in the body, without the quotes.
>

---------------------------------------------------------------
To unsubscribe, send email to majordomo at ender.shadowfire.org
with "unsubscribe ircservices" in the body, without the quotes.