[IRCServices] problem running services

[Chris Knipe]

Hi...

If you changed the version in the ircservices code, and did not do that
right, I believe this can very well be your problem - I did however not
verify this.  It should still in such a case however, still complain about
it the log files, which bring me back to file permissions.  Run services in
console mode and see what happens.

Regards
Chris Knipe
Cell: (083) 430-8151
Natural ability without education has more often attained to glory and
virtue, than education without natural ability at all.


----- Original Message -----
From: Chuck <chuck at featurecity.net>
To: <ircservices at ender.shadowfire.org>
Sent: 08 July 2000 06:34
Subject: Re: [IRCServices] problem running services


> one more thing which may cause the problem too.. I did change the version
of
> ircd to reflect the private changes i made in the system.. no operational
> changes , just text to the user changes, then i changed the version..
wonder
> if that has anything to do with it? does services request a version report
> from ircd?
> or just blindly accept what i choose in configuration?
>
> -----Original Message-----
> From: Chris Knipe <cgknipe at mweb.co.za>
> To: ircservices at ender.shadowfire.org <ircservices at ender.shadowfire.org>
> Date: Saturday, July 08, 2000 11:08 AM
> Subject: Re: [IRCServices] problem running services
>
>
> >Hi...
> >
> >I guess you checked the file permissions?
> >
> >I'm just thinking now, wh services wont be writing to it's log file...
> Erm,
> >check the services documentation, what happens when you try run it with
the
> >options to run services in console...  Whether it's able to write to the
> log
> >or not, won't matter, because u will still get output on the console and
so
> >forth.
> >
> >Regards
> >Chris Knipe
> >Cell: (083) 430-8151
> >Natural ability without education has more often attained to glory and
> >virtue, than education without natural ability at all.
> >
> >
> >----- Original Message -----
> >From: Chuck Gorish <chuck at featurecity.net>
> >To: <ircservices at ender.shadowfire.org>
> >Sent: 05 July 2000 11:48
> >Subject: Re: [IRCServices] problem running services
> >
> >
> >> it is a new installation.. first time running services.. the log is at
0
> >bytes
> >>
> >> At 04:46 AM 7/5/00 -0400, you wrote:
> >> >At 18:28 07/04/2000 -0400, you wrote:
> >> >>Any suggestions would be appreciated. I keep getting a Segmentation
> >Fault
> >> >>when I try to start the services. I am trying to set up with the
> >> >>following system configuration:
> >> >>
> >> >>Cobalt RAQ2 machine with the following OS:
> >> >>Cobalt Linux release 4.0 (Fargo)
> >> >>Kernel 2.0.34C52_SK on a mips
> >> >>for ircd I am running DreamForge 4.6.7
> >> >>services version is 4.3.3
> >> >>
> >> >>I made no modifications to the services source and was able to get a
> >> >>successful make first time. make install also worked with no errors.
> >> >>
> >> >>Any ideas where I can look to correct this or will services not run
> >under
> >> >>this configuration?
> >> >>
> >> >>
> >> >>
> >> >>Chuck
> >> >
> >> >What is the error you get in the services log when you attempt to run
> >> >it.  And any other information would be helpful.  Check the services
log
> >> >completely even though it should only have 1 to 3 lines per time you
> >> >attempted to start services.
> >> >
> >> >Also is this a new installation or was there a previous version of
> >> >services on the system
> >> >
> >> >
> >>
>
>>--------------------------------------------------------------------------
> -
> >------------------------------------------------------
> >> >Phantom
> >> >PhantomNet IRC Networks
> >> >Network Administrator
> >> >Visit us at /server irc.phantomnet.net
> >> >
> >> >
> >> >---------------------------------------------------------------
> >> >To unsubscribe, send email to majordomo at ender.shadowfire.org
> >> >with "unsubscribe ircservices" in the body, without the quotes.
> >>
> >>
> >>
> >> Chuck
> >>
> >>
> >> ---------------------------------------------------------------
> >> To unsubscribe, send email to majordomo at ender.shadowfire.org
> >> with "unsubscribe ircservices" in the body, without the quotes.
> >
> >
> >---------------------------------------------------------------
> >To unsubscribe, send email to majordomo at ender.shadowfire.org
> >with "unsubscribe ircservices" in the body, without the quotes.
>
>
> ---------------------------------------------------------------
> To unsubscribe, send email to majordomo at ender.shadowfire.org
> with "unsubscribe ircservices" in the body, without the quotes.




---------------------------------------------------------------
To unsubscribe, send email to majordomo at ender.shadowfire.org
with "unsubscribe ircservices" in the body, without the quotes.